Posts Tagged video

5. The Set Up Wizard.


Boot up splash screen


As soon as the 3View unit is plugged in and switched on, it will begin it’s initial boot up. You will see the 3View white splash screen which will appear and disappear. This will be accompanied by the three lights on the front of the unit blinking on and off.  Please be patient! The 3view unit will take a minute or so to fully boot up the first time that it is connected to the mains and this is quite normal. Once the boot up sequence has completed, you will see the first set up screen to guide you through setting up the 3View unit to suit your set up.


First Set up screen



Moving through the Wizard set up screens is easy. Simply click  OK on the Next tab using the remote control to move onto the next screen. To move around any choices offered in the Set up wizard screens, use the arrow keys on the remote.



Setting up your TV's resolution


The first item that you need to set up is the resolution for you particular television. Scroll up and down using the arrow keys on the remote to select which resolution you prefer from the list and then click on OK. The Wizard will then test to see if that resolution is fully supported by your television. If you cannot see a picture, then the wizard will return you to the set up screen to try out a different resolution. If you see the screen shown here then your television can display the chosen resolution and you can click  on Yes and then move onto the next screen by clicking on Next.


Setting up your timezone


In the next screen you will be asked to set up your particular time zone and whether or not to use Daylight Saving Time. Move up or down the different time zones using the arrow keys on the remote, select your time zone by clicking OK followed by clicking on Yes or No for Daylight Saving time and then Select Next. The next screen is for choosing the source  of your television signal and should be left on Antenna. After clicking on Next from that screen, the 3view unit will begin to scan for all of the channels available in your area.


Scan for Channels ends



You can stop the channel scan at any time, and those channels found so far during the scan will be saved. It does take some time to complete the scan so please do be patient!



Detecting your Network settings


Next you will be asked configure the 3view box to your network. If you have connected the 3View unit via the included Ethernet cable to your router then the 3view unit should set up your network connection automatically. Following setting up your network connection you will  be asked to either keep the default name 3View for the unit on your Network or give it your own preferred name such as ‘PVR’ or  ‘Freeview TV’ for example.



Following setting up your network settings on the unit  the set up wizard is complete and you will be taken to Live TV to enjoy watching all of your Freeview channels. 

Tip!   At any time during the Wizard set up screens, you can always go back by clicking on Back or Previous during the set up procedure.

Page 5 


, , , , , , , , ,

Leave a comment

21. Settings. System.



Check or change your Network settings


The simple Network Setup Wizard is used to set the unit up on the local network. Pressing OK leads to a series of choices in which the type of network is confirmed (Wired, Wireless or None) along with the network name to be applied to the unit. There is also an option to set aspects such as the network address manually should the need arise. Once the Wizard is complete, confirmation of the unit’s network name and its successful connection are displayed in the Network Settings screen.


Video Output

Select Video Output or change itThe 3view unit is capable of automatically detecting the screen resolutions available on the TV to which it is attached. Pressing OK on Preferred Resolution displays the choice available and moving onto the list, highlighting the chosen resolution and then pressing OK will prompt the unit to make the change. If there is a problem with the display, the previous format will be restored after a wait of 15 seconds.

The Screen Shape option is used to set the shape of the screen to which the 3view is attached: standard 4:3 or widescreen 16:9. Move across and press OK to make a selection.

Digital Audio
Pressing OK on this menu entry will cycle through Bitstream (audio sent in original format), None (no digital audio output) and PCM (digital audio converted to stereo). Bitstream is the default choice for most installations, but PCM may work better if the attached audio device cannot decode the Bitstream format.

Time Zone
There are five settings to be made in this section:
Time Zone
Use the OK button to select the local time zone.
Daylight Saving Time (British Summer Time)
Decide whether or not the unit should acknowledge the change to and from Daylight Saving Time.
Setting Mode
Choose between automatic and manual clock setting. If the automatic option is chosen, date and time will be set using broadcast information.

The date only needs to be set if Setting Mode is set to manual.

The time only needs to be set if Setting Mode is set to manual.

System Info


There are two particularly useful pieces of information in System Info: Version Information and Chip Serial Number. Version Information indicates which firmware is currently installed and Chip Serial Number is the equivalent of the unit’s Serial Number, the same number as that printed on the label underneath the unit and on the box in which it was packed. The unit’s Serial Number is displayed here and so this is a convenient way to obtain it.


Software Update
Software update from the Network

New software (firmware) may become available from time-to-time either by download through the My3view link on the 3view website (registration is required) or directly over the Internet to the 3view unit. If the source is the My 3view link, the file must be transferred to the unit by USB flash drive which is plugged into one of the two USB ports at the rear of the case. USB/Removable-Media Update and Network Update allow the source to be chosen and the available releases are listed on-screen.


The central arrow keys are used to select the software to be loaded and pressing OK on Install Now will start the process which may take a little time. Once the software has been installed, the unit will restart. Settings, the program Guide (EPG), timers and recordings will all be unaffected.

System Reset
This menu offers opportunities to reset all of the system or selected areas.

Restart System will interrupt any recordings in progress and reboot the unit. The operation takes several minutes and is initiated by arrowing right and pressing OK on the Restart button.
Full Reset of unit

Clear Local Media is used to permanently delete all locally saved photos, music and video. Arrow right and press OK on the Clear button. This function should be used with care as its effects cannot be reversed.

Clear Data and Restart System Arrowing right and pressing OK on the Reset button will permanently delete all content on the device. All locally saved media, recorded TV programs, databases, settings, and preferences will be lost. The operation takes several minutes to complete, following which the device will restart and run the startup wizard.


Warning!  Using this option will delete all data and settings and return your unit to factory settings!


, , , , , , , ,

Leave a comment